0

right now this is our current BGP config. we have two class C's and two ISP's. we would like both networks to prefer the Verizon path 157.130.124.197 for inbound over ATT while we do maintenance on the ATT circuit and would like some advice on the best way of doing this. thank you

router bgp 1123
 no synchronization
 bgp log-neighbor-changes
 network 12.80.93.0 mask 255.255.255.0
 network 208.220.256.0
 neighbor 12.88.105.13 remote-as 7020
 neighbor 12.88.105.13 version 4
 neighbor 12.88.105.13 send-community
 neighbor 157.131.125.121 remote-as 704
 neighbor 157.131.125.121 version 4
 neighbor 157.131.125.121 send-community
 no auto-summary
Improve this question
3
  • Where are the Class C addresses?
    – Ron Maupin ♦
    Commented Dec 8, 2015 at 22:05
  • 1
    I think that's AS702, not AS7020.
    – Teun Vink
    Commented Dec 8, 2015 at 22:05
  • Did any answer help you? if so, you should accept the answer so that the question doesn't keep popping up forever, looking for an answer. Alternatively, you could provide and accept your own answer.
    – Ron Maupin ♦
    Commented Aug 12, 2017 at 23:22

1 Answer 1

Reset to default
4

Shut down your BGP session with ATT and wait a few minutes for BGP to converge globally, that should do the trick.

Improve this answer
1
  • Or mark your announcements to ATT "no-export", so they apply only to things within their AS.
    – Ricky
    Commented Dec 9, 2015 at 2:19

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.