I enjoy having the feature of being able to watch real time logs as they occur, but I cannot figure out for the life of me what the Cisco equivalent command for " monitor start logfile " as it is on a Juniper device.
1 Answer
logging monitor in configuration mode will give you live logging on a SSH or Telnet access. you can set the logging level after monitor, for instance logging monitor debugging will give you everything. On console access it's logging console debugging as an example. Use no in front of the command to disable.
-
1Be super careful with this in older IOS-based devices. While Junos has lots of protection in place so that logging doesn't overwhelm the routing engine, the same cannot be said for older Cisco routers and switches. With too much logging enabled, you can bring the router/switch down to the point where you can't even manage it any more Commented Apr 29, 2018 at 3:07