Return to Question

I've configured a vlan 3 with ip address and then assigned FE port to vlan 3 , i read that this will assign the ip address to the FE interface. I know this is really simple configuration .But really would love some help on how to assign IP addresses to FE interfaces on switches in CPT .

   Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
 !
interface FastEthernet0/1
switchport access vlan 3
switchport mode access
!
    

I've configured a vlan 3 with ip address and then assigned FE port to vlan 3 , i read that this will assign the ip address to the FE interface. I know this is really simple configuration .But really would love some help on how to assign IP addresses to FE interfaces on switches in CPT .

   Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
 !
interface FastEthernet0/1
switchport access vlan 3
switchport mode access
!
!
interface Vlan3
ip address 172.12.123.1 255.255.255.0
!
    

I've configured a vlan 3 with ip address and then assigned FE port to vlan 3 , i read that this will assign the ip address to the FE interface. I know this is really simple configuration .But really would love some help on how to assign IP addresses to FE interfaces on switches in CPT .

I've configured a vlan 3 with ip address and then assigned FE port to vlan 3 , i read that this will assign the ip address to the FE interface. I know this is really simple configuration .But really would love some help on how to assign IP addresses to FE interfaces on switches in CPT .

   Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
 !
interface FastEthernet0/1
switchport access vlan 3
switchport mode access
!