1

I'm studying Private VLAN on C3560 Cisco Switch hardware. When i enter the 

(config-vlan)#

It doesn't contain the private-vlan command in the list of available commands. I turned the VTP mode to Transparent, VTP version = 1. VLAN 500 is created and active. IOS = 12.2(55)SE5. I followed this document in practiced [Catalyst 3560 Switch Software Configuration Guide, Release 12.2(55)SE] Still don't know why. ScreenShoot The version is here. Show version

How can i get through this situation? Thanks in advance.

Improve this question
8
  • Event when i change VTP version = 3, it still didn't have the command.
    – Federal Reserve
    Commented Nov 9, 2016 at 9:06
  • Have you actually tried to enter the command, and is it rejected? Sometimes the 'list of commands' is not correct, so first of all I would like to confirm if it's just a cosmetic issue or if the command is really missing.
    – hertitu
    Commented Nov 9, 2016 at 12:44
  • And, what image version / feature set are you running, can you include "show version" output in your post please.
    – hertitu
    Commented Nov 9, 2016 at 13:01
  • 1
    Can you add the output of "show version" and "show license"
    – John K.
    Commented Nov 9, 2016 at 13:03
  • Are you absolutely sure that this is a Catalyst 3560 with that IOS version? For instance, a Nexus would need the switch(config)# feature private-vlan global command run before the Private VLAN commands are available.
    – Ron Maupin ♦
    Commented Nov 9, 2016 at 16:08

1 Answer 1

Reset to default
2

Thank you guys, my switch is running LANBASE license, just found out and let you know. At least I should have an ipbase license to run private-vlan feature. Topic should be closed now. Thanks again.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.