2

I have a Cisco 3650 switch and want to backup my IOS via tftp.

System image file is flash:packages.conf

#sh flash   
cat3k_caa-base.SPA.03.03.05SE.pkg   
cat3k_caa-drivers.SPA.03.03.05SE.pkg  
cat3k_caa-infra.SPA.03.03.05SE.pkg  
cat3k_caa-iosd-universalk9.SPA.150-1.EZ5.pkg   
cat3k_caa-platform.SPA.03.03.05SE.pkg  
cat3k_caa-wcm.SPA.10.1.150.0.pkg       
packages.conf   
nvram_config  
vlan.dat

Which file i want to download for backup the current ios on cisco switch?

And how can i download this ios to another switch?

Improve this question
2
  • As already mentioned in an answer, most probably this switch is not a 3560. Please confirm the switch model with the command show inventory
    – Daniel Yuste Aroca
    Commented Feb 7, 2016 at 19:32
  • Its 3650 switch, how to download those files to switch?
    – Tech
    Commented Feb 9, 2016 at 5:11

1 Answer 1

Reset to default
4

Is it possible you are talking about 3650, not 3560? The switch is running in "install mode" and .pkg files are packages extracted from .bin. You could check the files that switch is using with a command:

show version running

Backup all these files + packages.conf (if you do not have original *.bin file)

Improve this answer
1
  • Yes, its my mistake, the switch is 3650. i took all .pkg files. how to download to another same switch? Its the same way like dealing with .bin?
    – Tech
    Commented Feb 9, 2016 at 5:05

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.