nexus ospf network statement missing

Question

In old school IOS we used to do

router ospf 1
 network 0.0.0.0 255.255.255.255 area 0

But in Nexus switch i am not seeing any command or related doc, how do i announce my subnet in ospf in nx-os

My nexus 9k config

router ospf 100

interface loopback1
  ip router ospf 100 area 0.0.0.0

interface Ethernet2/11
  ip router ospf 100 area 0.0.0.0

Here is my interface config,

interface Ethernet2/11
  description Point-to-Point-link-of-ospf
  no switchport
  ip address 10.0.0.10/30
  ip router ospf 100 area 0.0.0.0

interface loopback1
  ip address 74.xx.xx.1/23
  ip router ospf 100 area 0.0.0.0

In my neighbor router i am seeing following in my route table

R2# sh ip route ospf-100
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

74.xx.xx.1/32, ubest/mbest: 1/0
    *via 10.0.0.10, Eth2/11, [110/2], 00:08:08, ospf-100, intra

Why i am seeing following route /32 instead of /23 ????

74.xx.xx.1/23 i want to announce this route

Answer 1

Cisco routers (and switches) treat loopback interfaces as host routes by default.

You can change this behavior by

interface loopback1
ip ospf network point-to-point